Backyard Roller Coasters

The CrossBow – Our Best Backyard Roller Coaster Yet

It was a fantastic, exciting, crazy day at Jeff and Abraham’s house. Lyle and I got up early, loaded the CrossBow Cart onto the back of the car, and drove over to Jeff’s house for one last test of the whole thing!

As you’ll see from the early part of the video, Our Best Backyard Roller Coaster Yet didn’t come off without a hitch or two. First of all, the track in turn one is a little too wide to accommodate the wheel assembly design on the CrossBow Cart. So, the wheels would pinch and slow the cart almost to a stop on entering the turn. Not the best result, especially in the first turn of the first test. I don’t mind saying, things got a little tense when we first saw that issue.

The rest of the ride was fantastic. Turns two and three are smooth, fast and strong. Jeff, Rob and the rest of the construction team did a great job.

At the end of the day, we decided to narrow the track by about half an inch in turn one. That way, the cart wont encounter too much friction. I’m also going to adjust the main wheels outward a bit so there’s no chance that the big long board wheels contact the 2×4 ties at any point. This will reduce bumps and noise and it’ll make the thing faster still.

All told, Lyle and I are thrilled with this coaster. Next week, if we’ve got time, we’re going back to my house to do some testing on The Caution Zone, which is the coaster we built in our yard. So, please stay tuned for that!

Thanks for watching!
Best,
Will

Share on FacebookTweet about this on TwitterShare on Google+Share on RedditShare on LinkedInPin on PinterestEmail this to someone

My Best Backyard Roller Coaster Yet

Say hello to The CrossBow! That’s what we named this new cart. The reason is that the front suspension has a curved steel part right up front, and the steel pipe that runs nearly the length of the cart reminded me of a bow and arrow.

The cart is entirely custom. Every bit of everything, except the wheels, bearings and some of the screws was built by hand by me. I’m incredibly proud of The CrossBow!

Meanwhile, over at Abraham’s house, the track is coming along nicely. The carpentry crew has a little cleaning up to do here and there, and some of the tolerances aren’t quite where they need to be. But, the whole thing was good enough for some pretty great testing, as you can see from the Video above. In another day or two, I’ll post a second video to dig into the details of the walkthrough and some of the design/build features of the CrossBow cart. You’re gonna love that one!

Stay Tuned, and please be sure to Like, Share, Follow, Digg, and Tweet about The CoasterDad Project!

Share on FacebookTweet about this on TwitterShare on Google+Share on RedditShare on LinkedInPin on PinterestEmail this to someone

Roller Coaster Stick Bomb


This was So Much Fun!

When I saw my first stick bomb on YouTube, I just had to make one! It took a few weeks to get all the pieces in place. Finding the time, the sticks, and figuring out the best place to put it. In the end, we decided that the only thing more fun than a stick bomb would be a Roller Coaster Stick Bomb! So, that’s just what we did.

I hope you enjoy this awesome ride!

Share on FacebookTweet about this on TwitterShare on Google+Share on RedditShare on LinkedInPin on PinterestEmail this to someone

Steel Wheel Assembly With Multi-Axis Steering

Here is the latest test of the new Steel Wheel Assembly, which I’ve taken to calling The Steel Wheels. I’m also using the term Multi-Axis Steering to describe how the design is coming together. For this design, both the front and back axles will steer on their respective longitudinal axes. This means that if you were to extend an imaginary line from the axle towards the inside of the turn, both sets of wheels will always run perpendicular to the center of whatever curve they’re traveling through. This reduces friction as well as load on the track and the cart, allowing the cart to make better use of its potential and kinetic energy.

The other part of the Multi-Axis Steering system is where the design allows each axle to rotate independently on the longitudinal axis of the cart. That means when the track starts to bank one way or another, the front wheels will bank independently from the back wheels. The same goes for the back wheels. This is a great improvement over the original cart, which only had longitudinal steering in front. Watching the new design negotiate banks and turns shows an amazing difference.

Now, I know that Multi-Axis Steering isn’t exactly groundbreaking technology.  What’s exciting about this particular application is the fact that every bit of this system, except the skateboard wheels and bearings, was built from scratch. So, there’s no shortage of satisfaction as this project continues.

Stay tuned! Next up, we’ll show you how we’re solving the problem of low-cost, high-efficiency lift segments in backyard roller coasters!

Share on FacebookTweet about this on TwitterShare on Google+Share on RedditShare on LinkedInPin on PinterestEmail this to someone

Good, Fast, Cheap: Pick Two! The Truth About Steel

Why build things with steel? Let me count the ways! As we continue our exploration of backyard roller coaster construction and enjoyment, exciting lessons abound. Said differently, we’ve all got a lot to learn. The whole good-fast-cheap-pick-two idea isn’t new. I first learned this at a printing shop in San Rafael, California.

Yes. Once upon a time, people had to travel to businesses just to get things printed in color. Imagine the inconvenience and hardship. But, I digress…

Anyway, there was a sign which read, “Good, Fast, Cheap. Pick Two.” It was hilarious, and expressed one of life’s rigidly unflinching truths. We can’t have it all. If you want it good and fast, it’s not going to be cheap. If you want it fast and you don’t have a lot to spend, it’s not going to be very good. And finally, if you want it to be good and you still don’t have a lot to pay, you’re going to have to wait a while.

This lesson applies to backyard roller coasters in a big way. For most of us, we don’t have big budgets to make our projects come true. So, we work to find affordable materials like lumber and PVC for tracks, and usually, backyard roller coaster carts are made of wood. For Abraham’s project, we stepped it up a bit, building the cart with welded steel. It’s super strong and smooth, and it’ll be lighter than a wood cart. In other words, it’ll be Good. I’ve done a bit of scrounging for materials, and I borrowed a high quality welding machine in order to control costs. So, we can also check the “Cheap” box on our list. This means, however, that it’s taking a little time to get it done.
Good, Fast, Cheap. Pick two.

The video accompanying this article shows a bit of how it’s designed and hopefully gives some insight into the thinking that went into creating the wheel assembly. What I’ve found more than anything else is that it’s incredibly hard to resist the urge to start over with some new improvement that occurs halfway through the project. I’ve already come up with at least ten refinements we’ll incorporate into the next cart design.

Thanks for visiting The CoasterDad Project, and for helping us to share the joys of Physics, Family, and Fun! Please be sure to Share this article on Facebook, Twitter, and LinkedIn.

Share on FacebookTweet about this on TwitterShare on Google+Share on RedditShare on LinkedInPin on PinterestEmail this to someone

Meg Rides The Caution Zone!

We had a very special guest visit the CoasterDad Compound! Our friend Meg came by with her dad, George, and we got to spend a little time riding our backyard roller coaster, The Caution Zone.

Thanks, Meg! It was great meeting you. Keep on watching our videos. We’ll let you know when we’re done with Abraham’s coaster. Maybe you can come ride it, too!

 

Share on FacebookTweet about this on TwitterShare on Google+Share on RedditShare on LinkedInPin on PinterestEmail this to someone

Tree House Roller Coaster Is Taking Shape

Boy, oh boy! The tree house roller coaster station is going up, up, up over at Abraham’s house while I’m back at the shop welding the steel cart. A couple of really cool things are going on this week with our tree house roller coaster project, and every one of them is a first!

Jeff, Hunter, Victor, Rob and I spent several days this week doing the hard part. Digging, sawing, carrying, mixing, hammering and generally working our fingers to the bone to keep Abraham’s tree house roller coaster project on track. It’s been super hard work, and super good fun. Rob is a great carpenter and craftsman, and we’re lucky to have his help with all this.

Meanwhile, back at the shop, I’m design-building our first ever steel roller coaster cart. Working with steel is exciting and fun. The main difference between woodworking and steel work is that you can unscrew two pieces of wood. Unwelding, however, isn’t really a thing. So, measure thrice, weld once! And yes, I learned that the hard way.

In other news, we got noticed and liked and tweeted about this week by the nice folks at Edutopia! It’s an amazing honor to be recognized by one of the most forward-thinking educational organizations on Earth. I’d like to personally invite their founder, George Lucas, to come ride Abraham’s Tree House Roller Coaster when it’s finished.

The CoasterDad Project is getting all kinds of props from all kinds of people, and I can’t thank them enough. Please be sure to Tweet, Like & Share this post and the CoasterDad Project Videos.

See you soon!

Share on FacebookTweet about this on TwitterShare on Google+Share on RedditShare on LinkedInPin on PinterestEmail this to someone

Abraham’s Backyard Roller Coaster – Part 1

The word is getting around about CoasterDad! In fact, Jeff has asked us to build a backyard roller coaster for his son Abraham! What an incredible opportunity for us, and for our growing group of supporters, and especially for Abraham, his family, and his neighbors!

The backyard at Abrahams house is just perfect for a “Terrain Coaster!” That means, we’ll put the coaster station in a tree house, and after the launch, the track will stay pretty close to the ground. This is made possible because the backyard has quite a few elevation changes. So, the whole thing will be super strong, which means it can be super fast, and super fun!

The first day we met with Abraham and his parents, we did quite a lot of math! That’s right! Math! We worked with Abraham to figure out all the parts and pieces he would need to build his backyard roller coaster. How many screws, how much lumber, how much pipe to make the rails, and so on. The thing about math is this. If there’s something awesome happening after the math problems, they’re not such big problems after all. Abraham knows that figuring out these numbers will get him that much closer to the best backyard ever!

Lyle and Abraham walked the backyard and talked about where the track should go, and what would be different and new about Abraham’s backyard roller coaster. We’ll be using stiffer, stronger pipe for the rails, and we’ll be making the cart out of metal instead of wood, and it will be more aerodynamic. This will make the cart lighter, which means it will be able to go faster and more smoothly. That is super exciting!

Stay tuned for updates on this exciting project. And, if you’d like to support science education for kids, please check out and donate to The CoasterDad Project on indiegogo. Click here to learn more about that: http://igg.me/at/coasterdad/x/6558240

Thanks for visiting CoasterDad.com. We build backyard roller coasters to support and promote Physcis, Family, and Fun!

Share on FacebookTweet about this on TwitterShare on Google+Share on RedditShare on LinkedInPin on PinterestEmail this to someone